1 / 2
Onewheel power molex converter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turns onewheel power connector into 2 XT60, 1 XT30, 1 8pin JST JWPF.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 53
- Makes
- 1
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Latest revision of my molex adapter that will convert onewheels power 16pin molex connector into 2 XT60, 1 XT30, 1 8pin JSTJWPF. Also the gasket is bigger so it covers more area. It is good but i still recommend using some silicone to be sure.
Version with one XT60 is also available.
Screw (M2-6) holds the connector from going inside the box but it will go outside when dissconecting. Fix that with epoxy or hotglue.
Adapter is secured with M5-20 screws.
Gasket - TPU
Adapter - PLA / ASA
Update after more than 1000km
- with the latest gasket and little bit of silicone for good measure, this board went through some serious thunderstorms and didn't let any water inside
- the screw “tunnels” are still the worst thing on the design