Patio Umbrella Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Braces designed to hold a patio umbrella against the railing of a deck. I designed it with the Ikea Fliso umbrella in…
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 102
- Makes
- 1
- Views
- 474
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Braces designed to hold a patio umbrella against the railing of a deck. I designed it with the Ikea Fliso umbrella in mind, but it can handle any diameter up to 38mm (and pretty much any size below there, thanks to the screw fastener). The screw holes to fasten to the railing are designed to fit #6 drywall screws.
Print Settings
Printer Brand:
TEVO
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Filament: Hatchbox PLA white
Notes:
The tolerance on the front screw fastener are set to a clearance of 0.4mm, pretty generous, but if you print quickly at low-ish resolution, you'll likely need it. The original version had 0.2mm clearance and required a lot of grinding and finishing post-print to function properly
Category: Outdoor & Garden
