1 / 2
Multi-Tool - This contains the G-code file only -- Remixed for true multi-colour printing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added true multi-colour to the bottom text
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 75
- Makes
- 0
- Views
- 640
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This only contains the G-Code for printing on a Prusa Mini/Mini+
Added true multi-colour to the model, so that the bottom portion with the text prints completely flat without debossed text and uses a separate colour for the text on the bottom as well as the top.
The g-code file is for a Prusa Mini/Mini+ and if you are printing with Orange and Black as my example, it will run as follows:
- Load Orange filament before you start printing from the g-code.
- About 4 minutes after starting, it will unload the Orange and prompt you to load the next filament (i.e. Black).
- After about 1 minute of printing the Black text, it will unload the Black and prompt you to load the next filament (i.e. Orange).
- Then after about an hour, it will unload the Orange and prompt you to load the final filament (i.e. Black).
Note: The text on the bottom will probably print cleaner than my example; if you use a smooth steel sheet instead of the textured sheet that I used.