Genmitsu 4030 XY-Axis carriage mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
XY carriage mod
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Modded the XY carriages to get them stiffer.
Used M3 brass inserts suggested for Voron printers.
M3 Threaded Insert (M3x5mmx4mm)
https://vorondesign.com/sourcing_guide?model=V2.4
You have to tap the M3 for the old screws and M5 and insert the M3 brass inserts after printing.
I secured the new screws after tension it with blue loctite 243.
The screws where around 20mm long i think.
After all i was able to mill aluminum with it. Good enough to mill parts to mod the machine for ball screws and linear rails X/Y axis.
https://youtube.com/shorts/GmiB3m2ab9M?feature=share
I suggest to use PLA, ABS or PC for this part. I used ABS and its seems like its good enough for the task. Milled over 10 hours and no issues so far.