Hario Skerton Grinder Handle (inner variant)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The handle and grip for the Hario Skerton Grinder. This variant goes inside the clamp, directly coupled to the teeth.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
The handle and grip for the Hario Skerton Grinder. This variant goes inside the clamp, directly coupled to the teeth. The coupling is strong but requires complete disassembly to change the handle.
After the model is printed, you will need to gently bend the handle (into an s-bend) so it avoids contact with the lip of the grind jar - I used two bowls of water, one hot and one cold - heated the handle in the hot water until it was flexible, shaped it and then immersed it into the cold water to fix the bend. Using gloved will help avoid getting burnt, and you could use a heat gun on a low setting instead.