Hario Skerton Grinder (top variant)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The handle and grip for the Hario Skerton Grinder. This variant sits above the teeth and clamp with better lip clearance
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
The handle and grip for the Hario Skerton Grinder. This variant goes above the clamp, although still coupled to the teeth. The major advantage is the additional lip clearance. I ended up using this variant.
After the model is printed, you will need to gently bend the handle (into an s-bend) so it avoids contact with the lip of the grind jar - I used two bowls of water, one hot and one cold - heated the handle in the hot water until it was flexible, shaped it and then immersed it into the cold water to fix the bend. Using gloved will help avoid getting burnt, and you could use a heat gun on a low setting instead.
Print in PLA or PETG, 15-20%
The handle will require a nut and bolt, perhaps a washer. You can use the grip contained in the other variant instead if you prefer a two-part solution.