Skosh spray bottle holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€18.93 – €23.13 net (excluding VAT)
For file: skosh-3-spray-holder_0.15mm_PLA_MK3S_23h46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €21.03 excluding VAT (range midpoint).
- Weight reported by the author
- 206 g
- Print time reported by the author
- 23.77 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A holder for 3 Skosh spray bottle attached to my kitchen sink door.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 45
- Makes
- 0
- Views
- 449
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I created this bottle holder for the Skosh botles, so I can easily access them. I used double sided tape to attach them to the door, so there are no screw holes in the model. If you want to use screws, don't forget to add them (note that the back wall probably needs to be a bit thicker then).
Used PLA for this print with a 0,15mm layer height to give a reasonable smooth surface. I didn't do any post processing on the model.