Scalable box vase mode
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.30 – €0.37 net (excluding VAT)
For file: Kallax insert 10% rounded vase_0.3mm_PLA_MK3S_21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 21 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed to fit a Kallax shelf. Scale it 500% and print 4 to use them horizontally as dividers. Or just have a box.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 116
- Makes
- 2
- Views
- 834
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Designed at 1/10 scale due to limitations with my software. Sorry!
Added version with rounded edges for stress relief. I suggest you to use this version!
Designed to fit a Kallax shelf. Scale it 500% and print 4 to use them horizontally as dividers. Or print one at full scale (1000%) to have an insert that will prevent your Kallax shelf from getting dirty, one you can pull out as a whole if needed be. Or just scale it whatever and have a box. It should be pretty OK to scale dimensions differently, but do watch out for overhangs. And for the love of anything that's beautiful do NOT print it in ABS like I did. Gcode included for time estimate, but you use it at your own risk, walls aren't as flat as they should be when using ABS filament.