Scalable box vase mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit a Kallax shelf. Scale it 500% and print 4 to use them horizontally as dividers. Or just have a box.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 116
- Wydruki
- 2
- Wyświetlenia
- 834
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Designed at 1/10 scale due to limitations with my software. Sorry!
Added version with rounded edges for stress relief. I suggest you to use this version!
Designed to fit a Kallax shelf. Scale it 500% and print 4 to use them horizontally as dividers. Or print one at full scale (1000%) to have an insert that will prevent your Kallax shelf from getting dirty, one you can pull out as a whole if needed be. Or just scale it whatever and have a box. It should be pretty OK to scale dimensions differently, but do watch out for overhangs. And for the love of anything that's beautiful do NOT print it in ABS like I did. Gcode included for time estimate, but you use it at your own risk, walls aren't as flat as they should be when using ABS filament.