1 / 1
DaVinci 1.0/2.0 fan and hotend shroud — image 1

DaVinci 1.0/2.0 fan and hotend shroud

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Completely replaced the stock hotend with a mk8 style hotend (I used and ender 3 and a red lizard V5 )

Rating
0 / 5
Likes
4
Downloads
17
Makes
0
Views
321
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a complete upgrade for a davinci 1.0/2.0 hotend. It has dual part cooling fans and a single 4010 heat break fan. 

You will have to relocate the extruder. On the original firmware it will not have part cooling fan support unless you hard wire it. You will have to modify the existing carriage by drilling 2 holes for M3 bolts. The hotend Shou have heat set inserts on the rear and M3 bolts long enough to pass through the holes in the carriage and be bolted on to the carriage. This isn't a beginner upgrade. 

Tags