1 / 10
Trinus Y Axis GoPro Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a way to easily mount my GoPro Session 5 to capture time lapses of 3D prints.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 303
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a way to easily mount my GoPro Session 5 to capture time lapses of 3D prints. With a Hero Session 5 mounted, there is still ~1cm of clearance when the print bed is full forward.
The mount attaches to the front end of the Trinus Y axis using 3-4 M3 screws. Since the base is 8mm thick, I'd recommend screws that are at least ~12mm long. The middle top mounting hole is difficult to get to which is why you can see that I did not screw it in, but the other 3 mounting points are stable enough.