Hose Adapter for Ryobi to Bravo SUP Inflator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a part I designed for the Ryobi P747 dual inflator. It enables you to use the tube for a Bravo branded hand…
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 196
- Makes
- 1
- Views
- 2,272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a part I designed for the Ryobi P747 dual inflator. It enables you to use the tube for a Bravo branded hand pump (Tends to come with a lot of inflatable kayaks and SUP boards). This is only for the low pressure/high volume side of the pump. I find this option better than permanently altering the original tube and requiring additional adapters to make it work for other inflatables. So far I found this Ryobi pump to be excellent for the price. I suspect this will work on other inflators like other Ryobi models or even the Dewalt Dual Inflator as well. I'm able to inflate my 10 PSI kayak within 5 minutes with this inflator however I can't speak for anything higher than 10 PSI since I've never tried it.
Print this in PETG or anything with higher heat tolerance. I printed in PLA and it shrunk from leaving it in the car.
Inflator Link: https://www.ryobitools.com/products/details/33287178780
Ryobi Port Dimensions: 24mm Diameter
Bravo Port Dimensions: 20mm Diameter
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
100%
Filament:
Use PETG or anything that can take higher temps. I printed in PLA and it shrunk from the heat in the car.
Notes:
- Keep in mind the tolerances are tight so you may have to adjust the size if your printer isn't very dimensionally accurate.
The inner ledge is a 45 degree chamfer and shouldn't require supports however the locking mechanisms will definitely need supports.