1 / 11
BMW i8 Snap In Wireless Phone Charger Upgrade — image 1
1 / 11

BMW i8 Snap In Wireless Phone Charger Upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An Upgrade Clip for the infamous BMW Snap In Charger to fit modern "KingSize" Phones incl. protective case.

Rating
0 / 5
Likes
4
Downloads
46
Makes
0
Views
720
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

BMW i8 Roadster - Wireless Charger Update

(works for other BMW models too… i guess)

 

I was finally able to fix one of the things that BMW should have fixed before production (in 2019)

nope… not the size of the Motor… but at least you can put your phone somewhere now while driving.

To give you the maximum strength of the part pls print it in a 45 degree rotation with supports on bed only (like you see in the picture) this way you have a bigger surface for your layers to bond at the weakest points of the part.

When the Part is printed and free from supports, put the feet on a file or a flat surface with fine sandpaper and give it a few swipes so the feet are flat and clean and you can check if the holes on the underside are free. If not, just clean em with a needle or so so you get the best possible fit on the original mounting-plate.

I used FormFutura Carbon Fil Filament, 100% Infill and 4 Perimeters with a 0.4mm NozzleX and 0.2mm LH and Mk2 with o.1mm LH

With non Carbon Filaments like PETG, ApolloX, ASA, ABS you could go even lower in layer-height i guess… but common… its an i8… Carbon was the obvious choice ;P

 

I try to show you the install as good as possible in the pictures. With that a delete of the whole charger to give you a nice big storage area is also possibel… i try to design an inlay for that as well when i have time.

Tools required:

Plastic pry-tools (Flathead work too but not recommended)

T6 Torx

Something that calm you down :/

 

Happy Upgrading

Tags