IKEA ADILS (Desk Leg) Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tapered Extension for IKEA ADILS desk leg - friction fit.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 56
- Makes
- 1
- Views
- 424
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried another model for IKEA ADILS extensions but they were completely straight sided (no taper) which worried me that they would not be very stable if subjected to a sideways force.
So I designed my own - these are tapered so should be more stable than non-tapered versions.
The friction fit is very tight but you should be able to take it off with your hands - the tight friction fit also allows you to use the threaded extended which comes on the leg to add even more height if you need it.
I printed mine in PLA+ which should be fine.
No supports needed.
Infill: 10%
Wall Thickness: 1.6mm
Wall Lines: 4
Wall Line Width: 0.4mm
It is super easy to print so there shouldn't be any problems. I went with thick walls for extra strength.