Thermoflask 4th Axis Laser Attachment Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model is a bottom cap for a Thermoflask 40 oz/1.2 L. Model is for supporting for tailstock end during laser engraving.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This model is a bottom end cap with center hole for a Thermoflask 40 oz/1.2 L. Model is for supporting for tailstock end during laser engraving.
The center support for the center hole could be removed. Clean up the model, and use as a replacement bottom cap for the bottle. The world is your oyster.
Inner diameter is 91mm
Outer diameter is 94.5
Successful print made with:
PLA
200c .4mm nozzle (PLA)
160c .4mm nozzle (Snapmaker support filament)
60c bed
.16mm layer height
25% Cubic subdivision infill
Printed on a Snapmaker Artisan 3in1 printer using dual filament nozzle