1 / 2
Remix for doing a Multi-colour print and a custom fit on Mastercraft calipers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Only includes the g-code for a Prusa Mini/Mini+
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 13
- Makes
- 1
- Views
- 544
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
This g-code file is specific to a Prusa Mini/Mini+
If you are printing in Orange with Black text then you'll need to:
- Start with Orange filament loaded on your Prusa Mini/Mini+
- About 8 minutes after starting your print from the g-code file, you will be prompted to change filament (i.e. Black in my example).
- The text only prints for 2 layers, so you'll be prompted to change filament again in about 1 minute (i.e. back to Orange).
- The remainder of the print will now be done in orange and takes about an hour.