1 / 4
Asus Zephyrus G14 stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Summary A stand for laptop Asus Zephyrus G14 - print 2 of them.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 155
- Makes
- 0
- Views
- 5,029
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
A stand for laptop Asus Zephyrus G14 - print 2 of them.
You can improve stability by adding two pieces of 4mm diameter rod through the holes. I used unthreaded aluminum, easy to cut (about 27.8 cm long).
The large hole on top allows proper cooling (fan vents are just above this part).
Versions
- v7.1: as printed on pictures
- v7.2: not tested. Please send feedback if you are happy/unhappy with these changes:
- width of thin bridges from 2mm to 4mm
- height of foot part from 2mm to 3mm
- 3 x 0.5mm high holes under the foot, that you can stick pieces of rubber to prevent slipping
Print files
- Below : v7.1 gcode for Prusa MK3S
- In the User print files page:
- v7.1 for Prusa MK3S MMU2S single
- v7.2 for Prusa MK3S (not tested)
- v7.2 for Prusa MK3S MMU2S single (not tested)
Print instructions
Printed with:
- Prusa MK3S MMU2S printer (single mode)
- PLA red (Arianeplast eco)
- Print on flat surface (lateral one)
- 0.2 mm quality / Prusament PLA default parameters except:
- 3 perimeters
- increased Z support distance to 0.2 mm
- Supports under both bridges