Locking spring for t.bone IEM 200R battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement locking spring with snap hooks for the t.bone IEM 200R battery compartment.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
The original part broke on the unit of a friend, and he asked me for a replacement. The result fits really well. it's designed so the hooks get printed separately so they are oriented during printing in a way that they will be strong enough to not brake during use.
thomann actual sells the battery compartment as a replacement part for around 10 euros but this way you dont have to wait for the package and you will produce less waste.
Print settings
I would suggest using PETG or a modified PLA that is not as brittle as standard PLA. Extrudr PLA NX2 works fine for example.
It’s a really small part so I used 0.1 mm layer height and 7 perimeters so its consists of only perimeters and no infill areas. It still printed in under 30 minutes. But I am pretty sure 0.2 mm and 3 perimeters will also work with no problems.
Post processing
Glue the hooks in the spring with CA glue, mind the correct orientation.
Mounting in the battery compartment
- remove the 3 screws
- pull the parts apart
- replace the original part with the new one
- put the parts together
- tighten the screws again