Mesh fan grills & fan support, Voron V2 & VT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Couldn't find any "clean" mods for adding mesh to the middle fan support, so i made this.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 246
- Makes
- 2
- Views
- 1,470
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Middle Fan Support with mesh
The mesh parts are made to snap in, but i added a tiny drop of CA-glue on the backside in some spots to make sure they stay in place.
Print the mesh with 0 bottom/top layers, 2 perimeters & 20% honeycomb infill. You will most likely need to tweak the infill angle to make the "points" of the hexagons point upwards (usually 0 or 90 degrees). (I also found that the side printed downwards/towards the texuted PEI gave the best look on the fan mesh/black).
For a reference to how to do the mesh part look at Eddies clip from 6:20.
- - -
In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!