Voron Trident mesh skirts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A complete set (250,300 & 350mm) of mesh skirts for Voron Trident.
- Rating
- 5 / 5
- Likes
- 91
- Downloads
- 533
- Makes
- 7
- Views
- 3,097
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Trident r1 Skirts with mesh
CHANGELOG
- 16.04.2023: I found a fault in the official CAD & .stl. Fixed in this update, refere to the issue I made.
- 16.04.2023: Initial release.
Regarding the middle fans you can use this.
!!Caution!!
- The two "parts" of each skirt segment are meant to be printed TOGETHER!
- For a reference to how this works, take a look at Eddies video from about 4:54.
- I've had some issues laying down the second/top-part on to the "meshed" first/lower-part if I run on my stock print & cooling settings, so to mitigate this I inserted some extra code (in my slicer) at the start and end of layer 4 (the first layer of the second/top-part start):
Layer 4 start:
M220 S50 ; Speed factor override percentage
Layer 5 start:
M220 S100 ; Speed factor override percentage
I've also set my filmaent cooling Disable fan for the first X layers to 4 so that the part cooling don't start up before the second/top-part has it's first layer put down.
- - -
In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!