Voron Trident mesh skirts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A complete set (250,300 & 350mm) of mesh skirts for Voron Trident.
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 533
- Wydruki
- 7
- Wyświetlenia
- 3097
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Trident r1 Skirts with mesh
CHANGELOG
- 16.04.2023: I found a fault in the official CAD & .stl. Fixed in this update, refere to the issue I made.
- 16.04.2023: Initial release.
Regarding the middle fans you can use this.
!!Caution!!
- The two "parts" of each skirt segment are meant to be printed TOGETHER!
- For a reference to how this works, take a look at Eddies video from about 4:54.
- I've had some issues laying down the second/top-part on to the "meshed" first/lower-part if I run on my stock print & cooling settings, so to mitigate this I inserted some extra code (in my slicer) at the start and end of layer 4 (the first layer of the second/top-part start):
Layer 4 start:
M220 S50 ; Speed factor override percentage
Layer 5 start:
M220 S100 ; Speed factor override percentage
I've also set my filmaent cooling Disable fan for the first X layers to 4 so that the part cooling don't start up before the second/top-part has it's first layer put down.
- - -
In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!