TBS Crossfire Immortal T Antenna
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this tube to transform a normal TBS Crossfire Micro antenna into an Immortal T. Things needed for the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 47
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I designed this tube to transform a normal TBS Crossfire Micro antenna into an Immortal T.
Things needed for the build:
- T printed in TPU
- micro antenna
- two 3mm diameter tubes about 80mm and 72mm in lenght.
- a zip tie
To assembly the Immortal, the micro antenna is first feed completely through the short leg of the T. The leg it should go out is the one opposite the cut of the short leg.
Next the antenna is retracted making sure the ground pole goes in the other leg of the T.
The 2 tubes can be inserted with a drop of glue into the T. The short 72mm tube is for the ground pole, the 80mm is for the transmitting pole.
To finish the antenna a zip tie is used to close the short leg and keeping the micro antenna fixed.
Let me know how it works for you :)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Hobbyking TPU Orange
Category: R/C Vehicles