AIOSense Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Includes the case bottom, top, stand and a PIR spacer to help alignment during soldering
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 40
- Makes
- 1
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
Overview
A case for the AIOSense PCB. Takes inspiration from the WIP case by the AIOSense team.
AIOSense is an all in one sensor PCB that includes support for mmWave, PIR, Light and Temp / Humidity sensors.
The AIOSense Project can be found here: https://github.com/Schluggi/AIOsense
The case should support PCB daughter boards, along with SMD configurations.
BOM
BOM, 4 x M2 self tapping meta / plastic screws. Both of the following MCMaster Carr screws should work - but anything similar too.
https://www.mcmaster.com/catalog/129/3371/99397A264
https://www.mcmaster.com/catalog/99397A269
Instructions
The PIR spacer can be placed under the TO-5 in order to maintain level while soldering.
The holes can be expanded with a drill for larger sizes if required.
Place the PCB in the base, then screw the top in place with the 4 self tapping screws. The stand can be glued on the back and should self align.