Trickerion CE Card Holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are some cardholders for the boardgame Trickerion Collector Edition.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
These are some cardholders for the boardgame Trickerion Collector Edition.
They are intended to fit into the top empty space of the box.
Print one of each either with supports, bridging, or both. After the print just clip off the small feet on the bottom. Then the cardholders will slip nicely onto the top of the board.
I used rather thin and tight-fitting sleeves and doubt it will work with any premium or larger ones.
Let me know if you have any comments or questions.
Print instructions
Printer Brand: Creality
Printer: CR-10S
Rafts: No
Supports: Yes
Resolution: 0.6
Notes:
Used a 0.8mm nozzle