1 / 2
Magnetic catch/latch for plexiglass door for enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic catch / latch for my enclosure
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 67
- Makes
- 0
- Views
- 775
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
I had a single handle that wasn't doing the job on my enclosure (made out of 3030 extrusion) and the acrylic sheet door/panel was starting to bend at the top and bottom. These are now mounted at both the top and bottom about 10 mm from the corner.
The acrylic door is 3/16" inches thick.
Uses 4 - 6mmx3mm magnets.
The catch mounts to 3030 extrusion.
The latch is held in place with a small 3mm screw.