Micrometer stand, clip jaw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A micrometer stand, to hold the micrometer Slight modification of model from Wehrenseb M4 or M5 screw; 8 to 16mm jaws
- Rating
- 4.5 / 5
- Likes
- 14
- Downloads
- 90
- Makes
- 2
- Views
- 595
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Micrometer stand
NEW 24 Aug 2023
Published new model with some improvements - Better and faster print
https://www.printables.com/model/562157-micrometer-stand
derivative of the nice design of Wehrenseb
Changes: wider base so it doesn't tip off ; uses as nut M4 or M5 hex nut; a shower of fillets and three sphere contact.
You will need one screw with hex head, about 50mm long, and one hex nut. Uploaded models of the base for iso M4 and M5 nuts (the jaw is the same)
uploaded 3 models for the jaw, for different thickness of the micrometer: 8mm (for bare metal manual micrometers), 12 and 16mm for those with plastic protector.
Mine was designer for Xibei 0003 basic digital micrometer.
You may glue jaw protectors in felt or rubber.
The Knob is a bit bit crappy design, you can pick some from other designer I won't be offended.