Silicon Carbide Crucible Mold
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€15.10 – €18.46 net (excluding VAT)
For file: Big Mold All Parts 0.3mm layer / silicon_carbide_crucible_big_mold_03mm_petg_mk3s_13h23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €16.78 excluding VAT (range midpoint).
- Weight reported by the author
- 301 g
- Print time reported by the author
- 13.38 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
You can make silicon carbide crucibles by using these molds.
- Rating
- 5 / 5
- Likes
- 129
- Downloads
- 723
- Makes
- 3
- Views
- 3,654
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
New molds, much better: https://www.printables.com/model/1185152-new-better-crucible-molds-for-microwave-metal-melt
There are 2 different size molds.
I print them in PLA 20% infill.
The Lid and inside cups should be printed @0.16 mm layer height or close to that to make sure threads fit perfectly.
See vide for instructions….if you only are interested in crucible, watch from 21.40