Lego - Saturn V Rocket Flames Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rocket flames stand for Lego Saturn V rocket
- Rating
- 5 / 5
- Likes
- 80
- Downloads
- 260
- Makes
- 5
- Views
- 3,103
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The flames are modeled with varying wall thickness, and printed with 15% Gyroid infill, with the intent to get a “flame effect” when lit from inside.
When printed upside down, no supports are required. I used Prusa Orange PLA Prusament to get an orange flame color when lit with a white LED from the inside.
The exhaust cloud, I printed in clear PETG with 5% gyroid infill. I used organic support with a 30 degree overhang threshold.
To “light up” the flames, I added LED holders and Pi Pico W for remote on/off PWM control to modulate the LEDs.
The raspberry-pi-pico-case case I used is from @George
Instructions for the electronics, pictures and video, including microPython code can be found on my repository at Github
See also short Movie showing the works…