1 / 1
Voron Trident PTFE Guides
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A guide to help the PTFE/reverse bowden tube do the somewhat sharp 90 degree bend into the extruder
- Rating
- 5 / 5
- Likes
- 250
- Downloads
- 1,519
- Makes
- 27
- Views
- 6,296
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Trident PTFE Guides
Printing:
- Default voron settings, correct orientation, no supports needed!
Bom:
- Only printed parts.
Description:
- Made to guide the PTFE tube uniformly into the extruder, and avoid rubbing against the top panel.
- One 90° version and one 105° version.
- The idea with the 105° is to point the PTFE tube slightly downwards so that it don't collide with the top side extrusions as badly, and / or bind up in them.
Note that this is intended to be used with an LGX Lite extruder, so i can't say if it will clear the top panel on a printer running a regular LGX, CW1 or CW2!
Pictures:
- - -
In case I forget to upload any eventual updates i make to the design to Printables, the latest released version should always be avalible on my gitub!