For Dell Rugged Extreme 7202/7212/7220 Tablet Handle V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 Angled Parts to connect to your Rugged Extreme Tablet. Much Cheaper than the original option. Uses tube material.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 295
- Makes
- 1
- Views
- 1,843
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Two angled parts for the Rugged Extreme Tablet to create a handle.
You need a few extra Materials for this.
Firstly, a rectangular tube with 15x15mm and a wall thickness of 1mm. Cost: ~5€ for 1000mm
My tube needed to be cut to a length of ~194mm.
Mount the angles and check your length. (For 7212)
Additionally, you will need two standard metric M3x16mm screws. ~ less than 1€
Total material cost less than 10€ or $. Significantly cheaper than the standard handle.
Printing
The drop resistance depends on the % of infill used and your print quality.
Print without supports, they are integrated in the design already.
I recommend a brim, the outer edges may warp during printing.
Use Ironing and a smooth flat bed for maximum surface quality.
Cheers!