Heatbed LED Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for the flashing LED of the heatbed on Prusa Mini.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 39
- Makes
- 3
- Views
- 433
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
If you do not want the LED of the heatbed light up your room / space, this is your mod :-)
This might be the smallest and fastest printing upgrade for your prusa mini.
As the LED of the heatbed can be very bright in dark rooms or spaces, I have created this small piece which will close the gap of the original “heatbed cable top cover”.
You can still see the red indicator light, but it will not brighten up your room.
The time to print is under a minute. I recommend to use white material, if you want it more "stealthy" use black material.
To install it, just loosen the top screw of the cable cover till you can pull it up a bit.
Then push in the heatbed LED cover gently in the gap with the straight edge to the front
and tighten the screw again.