Prusa LACK enclosure gap fillers remixed dimensions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Edited dimensions and groove depths to perfectly fit my Lack enclosure
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 27
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified to perfectly fit my Ikea Lack table.
I used these bottom cornes https://www.printables.com/model/459251-extended-bottom-corners-for-prusa-lack-enclosure which is extended with 2.4mm, so if you use the regular bottom corners, cut off 2.4 mm of the 3mm_plexi_gap_fill_lack_enclosure_vertical model in PrusaSlicer.
Optionally use the tool to get the best spacing between the legs and the table edges.
I also made horizontal fillers for the doors. They were made to fit together with these hinges and knobs: https://www.printables.com/model/36286-lack-locking-hinges-knobs