Magnetic building blocks / Magnetbausteine
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.90 – €1.11 net (excluding VAT)
For file: hexagon_1x_0.2mm_PLA_MK3S_1h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.00 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.08 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Additional bricks for the sets from Toylino / Ergänzung der Magnetbausteine von Toylino
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 90
- Makes
- 1
- Views
- 1,367
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Share Alike
EN - Additional bricks for the sets from Toylino
- Plate 1x2
- Plate 1x3
- Plate 2x2
- Big triangle 2x
- Pentagon 1x
- Hexagon 1x
- Octagon 1x
- … more to come (requests and new ideas are welcome!)
Attention: requires special diametrically magnetised magnets!
The magnets have to lay loose in the cavities so they are able to rotate
Used magnets in this model: 3mm diameter, 12mm length
Amazon - currently out of stock …
Pause print at 5mm to insert the magnets. The presliced files already contain the pause.
My print settings: 0.2mm (Quality)
- thinner layers or variable layer height might be beneficial (I am still fine-tuning my settings)
Printer: Prusa i3 MK3S
Material: PLA
Infill: 15 or 20%
Supports: no
DE - Ergänzung der Magnetbausteine von Toylino
- Platte 1x2
- Platte 1x3
- Platte 2x2
- Großes Dreieck 2x
- Fünfeck 1x
- Sechseck 1x
- Achteck 1x
- … Weitere in Arbeit (Anfragen und neue Ideen sind herzlich willkommen!)
Achtung: Benötigt spezielle Magnetstifte mit diametraler Magnetisierung!
Die Magnete müssen lose in den Hohlräumen liegen, sodass sie sich um ihre Längsachse drehen können.
Verwendete Magnete in diesem Modell: 3mm Durchmesser, 12mm Länge
Amazon - aktuell nicht lieferbar …
Druck bei ca. 5mm pausieren um die Magnete einzusetzen. Die angehängten Dateien beinhalten die Pause bereits.
Verwendete Einstellungen: 0.2mm (Quality)
- dünnere Layer oder variable Höhe wären eventuell hilfreich (ich bin noch am austesten der besten Einstellungen)
Drucker: Prusa i3 MK3
Material: PLA
Infill: 15 oder 20%
Supports: nein