Heavy Duty Swinging Hook Base with Eyelet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple to print heavy duty swinging hook with eyelet.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 24
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I created this swinging hook to hang my daughter's bicycle from the garage ceiling.
Printed with PETG and 100% infill since it needed to hold some weight. I could've probably reduced the infill, but best to be safe. Use your own judgement based on what you'll be hanging.
I've modified the design slightly from my picture to provide additional room for the hex nut to clear the top of the lag screw.
Use (1) x ½" x 3 ½" hex bolt and ½" washers to connect the eyelet to the base.
Use (2) x ½" x 2" or ½" x 3" lag screws to mount the base to wood studs based on your preference.
No supports needed when printing.