Heavy Duty Swinging Hook Base with Eyelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple to print heavy duty swinging hook with eyelet.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I created this swinging hook to hang my daughter's bicycle from the garage ceiling.
Printed with PETG and 100% infill since it needed to hold some weight. I could've probably reduced the infill, but best to be safe. Use your own judgement based on what you'll be hanging.
I've modified the design slightly from my picture to provide additional room for the hex nut to clear the top of the lag screw.
Use (1) x ½" x 3 ½" hex bolt and ½" washers to connect the eyelet to the base.
Use (2) x ½" x 2" or ½" x 3" lag screws to mount the base to wood studs based on your preference.
No supports needed when printing.