Liczymy pasujące modele…
I made this little guy to keep me company at my desk. It prints using minimal organic supports. The arms themselves print well at 0.15 layer height but the hands benefit from some support. Printed the planter using marble PLA and the seat…
Meet Swingy, the 3D printer swinging duck companion, that will guard your prints and keep on swinging, no matter what. Available in one piece or split in parts (easier to print and to make in different colors), requires only a cord to…
Swinging target for Nerf / Airsoft / Orbeez guns. All pieces snap together, so you shouldn't need any glue to assemble. There are two options for the target, hexagonal or circular. The legs for the stand contain print-in-place bearings to…
IT WORKS! :) After dreaming this up for awhile, I finally got it to work! This is a swinging drift clip. The base and top come together in a 45 degree angle that allows the top to swing back to the straight position after hit. The holes…
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
2" Mini Hitch with Pin hole. Includes Hitch Ball, Nut & Swinging Chained Nuts. I used glue to secure the ball & nut to the hitch and to secure chained nuts to hitch under ball & nut. I used BSI Maxi-cure…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Tinkaton (Swinging), Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
A swivel target that can be mounted anywhere you would like. Print one target, one swivel mount, and two stands. If you have a longer rod you could place multiple targets on one rod. Extra stands may be needed to support it. To make the…
Update August 27th: I found an issue where there was a clash with some bolts on enclosure because I did not cut away enough material from the parts. This left a small gap between the door panel and the enclosure when the doors were…
4-color multicolor printing of Kiki's Delivery Service. Swing using 3 used AAA batteries as weights. Join with double-sided tape or adhesive. Spraying lubricant on the rotating shaft will make it swing more smoothly. Rafts: No Supports:…
Easy print swinging Christmas tree - to hang or stand Einfacher schwingender Weihnachtsbaum zum stehen oder hängen 8 or 10mm thickness with feet Print in one part. 2. feet can be mounted on the tree lower end. Kann in einem gedruckt…
Created this cute BIRD ON A SWING Print is support free Included Files are -BIRD -SWING (STRING IS NOT PRINTABLE) FOR PERSONAL USE ONLY IF INTERSTED IN SELLING THEM CONSIDERING SUBSCRIBING TO MY PATREON LINK :…
Fairy Swinging hope you enjoy :-) Print in 2 mm Hight :-) Hope you share your print picture :-) follow and like for more.
A 3x3x1u Gridfinity Swing-Out Drawer. Suggest printing with the drawer with body cavity facing upwards, and no supports. Suggest printing body vertically, with the angled bridge pieces near the bottom, and no supports. Gridfinity concept…
Use M3x45mm bolts or included bolt for temporary use. Use 10mm*2mm disc magnets. Print at standard settings or solid for extra lifetime.
Summary A combination lock for a swinging door. Security is provided by three wheels with 6 numbers each. Size is approximately 100m x 50mm x 30mm. Wheels have internal springs to self align to the numbers. Select the combination by…
I haven't tested this yet but I'll be doing the 20K km service on my Street Triple soon and need this tool. Let me know if there are any issues with it. Designed for a 22mm socket. You'll need to consult your service manual for the torque…
Swinging Lid Tray Swinging Lid Tray is a two-dimensional member in our family of dynamic space packing puzzles. The goal is to pack six pieces in the box through a swinging lid in one of the sides of the 5x5-tray. As pieces enter the…
Bring a little motion to your Halloween setup with this Skeleton Moon Ghost Swing . The ghost sits securely on a functional hanging swing, and an LED tealight can be placed inside the ghost to illuminate the eyes. The swing can move…
I scrolled past something like this on Instagram and thought I would model something similar for printing. The holes in the hands and board are 5mm - I used some twine I had laying around. I would recommend you consider the height or…
This 3D-printed model is a reinterpretation of the classic swinging bird toy – designed here in the shape of a bat. It consists of separate parts: the wings, the body, a suspension bar for hanging, and a pull disc. When the disc is…
This is a phone stand that allows the phone to swing a bit. It also includes a hole to put a cable through, in case you want to charge it for example. All dimensions can be customized through the included scad file using OpenSCAD.…
4" swing style blast gate for woodworking dust collection systems. Print in PETG. 20% infill. At least 3 perimeters. Assemble using 8-32 x 1.25" machine screws
A new 3D figurine generated by AI, a Astronaut Swinging On The Moon. Do not scale down the model with think ropes I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA PolyLite Wine Red Transmission Distance: 1 PLA PolyLite Dark Blue Transmission Distance: 0.5 PLA…
Swinging Desk Phone Holder NB: The desk doesn’t swing. And it’s not a swingin’ 60’s retro thing, either. It accommodates a phone up to 72 mm wide and 10 mm thick. Scale to fit a smaller or bigger phone and use appropriately sized screws.…
Support recommended around parameter lip. I recommend printing at a high infill so it weighs enough to swing closed properly. I printed it 100% infill. I used clear petg to allow light in through the cat door. Approx 158.45mm wide…
Add a pet door to your screen door. Indoor and outdoor frames sandwich the screen and are secured with M3x14 screws and nuts. The swinging hinge is a set of captured M3x40 screws and nuts. Once in place, cut the screen around the inner…
Several mounting options available. Print the legs and set up for table top shooting or mount to your fence for backyard blasting. Easily disassemble, fold away or swap target designs with the simple pin assembly. Sturdy print should…
The tree is with 5 colors in mind. stem - brown tree - green band - silver star - gold ornaments - red
Simple swing decoration for JBL Wave/Vibe Beams. Probably compatible with other earbuds in a similar size (66 mm x 28 mm).
Our metal baby gate doesn't like to stay against the wall and as such it tends to swing outwards a bit. So I designed this clip to screw to the baseboard and hold the gate open. The clip opening is for 1/2" round bar and the base…
this target clamps to 3/4 in table or board. the ring that goes onto end of pin that holds targets is meant to be friction fit but might hav to be glued. included is a step file so you can make mods easier. Category: Sport & Outdoors
A fun dummy 13 accessorie.
Pant na výkyvné plexisklo do psí boudy. Hinge for swinging Plexiglas for doghouse.
INSTRUCTIONS: insert the long thiner pole through all of the parts that have holes. :D Next EVENLY hammer or shuve the poles with pointy tips point down into ground. make sure the tops are even to eachother and that it will rotate. Last…
Paper towel holder. Designed with swinging longer arms. Suitable even for jumbo rolls. Base has large surface so can be used - non damaging way - with 2-sided carpet tape. (Base has left and right version as I found this way holding on…
Uses three M3 bolts. The latch mechanism is print-in-place.
A simple headphone hanger I made because I noticed that hanging my headphones over the top of the microphone arm damaged the padding over time. Since I tend to adjust my microphone position from time to time I wanted a design that could…
Demo of the robot in action on youtube link. https://youtu.be/SqC5DtVkKks Demo of robot with Leg covers installed. https://youtu.be/uawtuOZ1-ME Link to the build video. https://youtu.be/eJdBbwap0vM Build and demo video coming soon to…
Have fun with this model either as a useful can to keep your 3d print area tidy or as a benign fidget toy while searching for inspiration. Settings: .1 - .2 layer height Supports- FO sho. I used a gyroid infill at 5% seemed to work great…
I really liked the original model but I needed to be able to hold a larger drink so I made cup it can hold larger and solid. The original clasp will be required for this and will fit on this. This will still require supports due to a…
Easy to Print 110.63mm x 200mm, 2mm thick. Prints in around 3hrs on my Geeetech A10T. For multi extruder printer, split into parts then select the parts for the second colour (first part in normally the base colour layer, all other parts…
Demo video can be found here. https://youtu.be/NK8dQAVe6aE Build video part1. https://youtu.be/0bTuniQQcXA Build video Part 2. https://youtu.be/TnjlRVCUGdE Many improvements from the original Foki robot I posted 6 years ago. The No20…
First version, a bit raw, let me know if it needs improvments
Top mounted filament sensor for Kobra 2 pro. swivels while printing so there is not too much tension on extruder. Just 2 nuts and an extension needed besides original ptfe tube and coupler. best printed so the pole are horizontally. Small…
A simple chain that I made recently as a part of a giant robot crab, and I decided to print its legs and make the flexible for a cool toy for kids and adults alike. I recommend printing in PLA+ and it needs to be printed with the flat…
Hey printers! 🎄 Here’s the final Christmas decoration of the year – rocking ornaments perfect for little ones! 🎅⛄ The set includes four cheerful designs: Santa, a snowman, a gnome, and a reindeer. These ornaments aren’t just for show –…
I needed a rack to mount my measuring spoons for powder. The rack is suited to 3.2mm holes or larger (size is 3mm) for hanging. 180mm L x 55mm H I'm still learning how to make things so I hope this is useful to someone Printed with no…
Oscillating extruder system for 'Bowden' printers with Z-axis on print bed. The system allows the radius of the bowden tube bends to be limited during printing. Bearing mounting allows rapid extruder disassembly 2 bearings are needed…
This is a swinging gingerbread man.
Print with lot of infill, use only PETG/PCTG, so it will not warp excessively. Tested up to 1000g. Nice for cell pelleting.
Swinging Arm Plug , a replacement part for the Beta Evo Trials Bike series, with the Beta Logo embossed or colored. The original part falls out very easily, this replacement part stays in place. Printing recommendation: PETG or other non…
I printed PLA, face down, no supports. Takes 5 minutes to print, just over a gram and about 0.35m or 1ft of filament. Printed in black in the photos. To install, gently lift up on the knob until it comes off, and then insert the knob back…
These 3D printed swinging doors are made for being used as a obstacle for Micro:Bit cars. Cars will have to open the door, placed on the side of the racing track, by pushing into them from either side and continue driving. Once opened,…
Someone must have put the world's most pathetic curse on me; to always live in a home without a place to hang a bath towel. The problem is that landlords will often ding you for making any modifications. This thing can be removed and…
edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…
hello this is my first model enable supports and dont even bother removing them it is prone to breaking otherwise. 100% infill for weight second version add a negitive part in your slicer to fit your finger also THANKS to gamma 4D for the…
Swinging targets for foam blasters. Requires: 15 - M3x6mm - Aluminum disc frames 10 - M3x14mm - Disc frames to braces 18 - M3x10mm - Brace mounting, Frame connection, feet You will need 5 Aluminum Discs, 3" (80mm) Diameter 24 Gauge…
Used the original for months and it worked fine but I always noticed that the funnel was too long and the edge was too far from the pivot point and it caused filament tangling the higher the x axis got. My solution was to shorten the…
Designed for use with full sheet CNC machines. (Lowrider 4 Specifically) Tree supports recommended. 2" clear hose recommended. Flat AC cable recommended. Print x1 Base, x1 Extension piece, x3-5 Clamps. M5/M6 Hardware. Cap/Pan. 24+ %…
Print with lot of infill, use only PETG/PCTG, so it will not warp excessively. Tested up to 1000g.
What it is A proper witch's cauldron for Halloween candy: a round belly standing on three claw feet, riveted cast bands, a rolled rim with green potion dripping down the sides, and a round wire handle that snaps in and swings. Fill it for…
Made a mount for my FNIRSI Oscilloscope to mount above the LCD monitor on my swinging tv arm , getting things off my workbench but still being positioned where i can use it , maybe helpful to someone wanting to mount one of these…
This is a door seal for a walk in bathroom swinging door. There are various types so check to see if yours is this. The width that fits in the channel is 10.1 mm and the flexible seal is over 11.35mm. Print in TPU It will straighten out.…
edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…
Rubber damper printed in tpe 82; pin printed in pla+. The shape copy the original damper of my swinging garage door. This kind of tpe is simple to print and very useful for this kind of applications.
Thing-i-verse not working right. try this link for the build files. https://www.thingiverse.com/thing:5252816 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Any PLA any…
I created this swinging hook to hang my daughter's bicycle from the garage ceiling. Printed with PETG and 100% infill since it needed to hold some weight. I could've probably reduced the infill, but best to be safe. Use your own judgement…
With the introduction of our puppy, we quickly realized that he wanted to pull the wicker boxes out of the furniture. Rather than store the boxes overhead away from his reach, I designed this simple system to prevent the boxes from being…
by being a 💙Printipal🧡! CLICK HERE Tired of your houseplants looking lonely or your car's rearview mirror feeling a bit drab? Introducing my delightful 3D-printable Swinging Duck decoration – the perfect solution to add a touch of whimsy…
