1 / 9
4’ Overhead swinging dust removal hose and power cord boom — zdjęcie 1
1 / 9

4’ Overhead swinging dust removal hose and power cord boom

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall mounted 4’ swinging overhead boom arm for 2" vac hose, and power.

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Designed for use with full sheet CNC machines. (Lowrider 4 Specifically)  

Tree supports recommended.
2" clear hose recommended.
Flat AC cable recommended.
Print x1 Base, x1 Extension piece, x3-5 Clamps. M5/M6 Hardware. Cap/Pan.
24+ % infill. PLA or PETG is fine. Ender3 Max or Larger bed required.
Shorten aluminum L channel (1/8" Thick Stock) to accommodate table location in relation to the nearest wall. Best to place table 1-2+ Feet away from nearest wall for service and access. 
Zip tie slots are everywhere for securing hose and cord. Use a bunch.
2" clear hose press fits into the base bracket, it CAN be pulled through, OR, a coupler for multiple hose types can be made that hot glues into the Base bottom.
(*Be sure to add a grounded wire to the inside of the hose to prevent fires / shorts / damage)
Also, the US Home Depot part number/name for the 2 hinges used is…
Everbilt 5" Tee Hinge
Zinc
SKU - 526-806
UPC - 30699-24410
About 5$ ea, need 2.

Designed for use with a Stealthsonic shopvac, and 2" or 1 7/8" clear hose + Duststopper Pro.

Tagi