1 / 9
4’ Overhead swinging dust removal hose and power cord boom — image 1
1 / 9

4’ Overhead swinging dust removal hose and power cord boom

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wall mounted 4’ swinging overhead boom arm for 2" vac hose, and power.

Rating
0 / 5
Likes
3
Downloads
6
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Designed for use with full sheet CNC machines. (Lowrider 4 Specifically)  

Tree supports recommended.
2" clear hose recommended.
Flat AC cable recommended.
Print x1 Base, x1 Extension piece, x3-5 Clamps. M5/M6 Hardware. Cap/Pan.
24+ % infill. PLA or PETG is fine. Ender3 Max or Larger bed required.
Shorten aluminum L channel (1/8" Thick Stock) to accommodate table location in relation to the nearest wall. Best to place table 1-2+ Feet away from nearest wall for service and access. 
Zip tie slots are everywhere for securing hose and cord. Use a bunch.
2" clear hose press fits into the base bracket, it CAN be pulled through, OR, a coupler for multiple hose types can be made that hot glues into the Base bottom.
(*Be sure to add a grounded wire to the inside of the hose to prevent fires / shorts / damage)
Also, the US Home Depot part number/name for the 2 hinges used is…
Everbilt 5" Tee Hinge
Zinc
SKU - 526-806
UPC - 30699-24410
About 5$ ea, need 2.

Designed for use with a Stealthsonic shopvac, and 2" or 1 7/8" clear hose + Duststopper Pro.

Tags