1 / 2
Mosaic Palette 3 (Pro) Skadis Stand - Upside Down — image 1
1 / 2

Mosaic Palette 3 (Pro) Skadis Stand - Upside Down

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This mounts your Pallette 3 (and 3 Pro) on an Ikea Skadis pegboard in upside down configuration.

Rating
0 / 5
Likes
2
Downloads
44
Makes
0
Views
394
Reviews
0

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

Mount your Mosaic Palette 3 (or Palette 3 Pro) on Ikea Skådis pegboard, upside down!

It utilizes theeze nuts to screw in the plate to Skadis, and M5 screws to mount Palette to the plate. There is also a bottom support lip for extra comfort.

BOM:

  • 4x M3x16 BHCS (for T-nuts)
  • 4x M3 washers (optional)
  • 2x M5x10 BHCS
  • 2x M5 hex nuts

Print with 0.2mm layers and more infill (I used 40%).

Place the M5 hex nuts in the holes so they sit flush with the back of the panel, add the T-nuts and mount the panel, then screw in M5 screws - but not all the way, let them stand out about 5mm - then mount the holder onto Skadis pegboard and secure the T-nuts, then give it a good yank to verify it's not going anywhere and carefully mount your Palette 3 onto the mount.

Don't forget to set screen rotation to 180° in the menu (or just tilt your head - you do you, fam).

Tags