Mosaic Palette 3 (Pro) Skadis Stand - Upside Down
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounts your Pallette 3 (and 3 Pro) on an Ikea Skadis pegboard in upside down configuration.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
Mount your Mosaic Palette 3 (or Palette 3 Pro) on Ikea Skådis pegboard, upside down!
It utilizes theeze nuts to screw in the plate to Skadis, and M5 screws to mount Palette to the plate. There is also a bottom support lip for extra comfort.
BOM:
- 4x M3x16 BHCS (for T-nuts)
- 4x M3 washers (optional)
- 2x M5x10 BHCS
- 2x M5 hex nuts
Print with 0.2mm layers and more infill (I used 40%).
Place the M5 hex nuts in the holes so they sit flush with the back of the panel, add the T-nuts and mount the panel, then screw in M5 screws - but not all the way, let them stand out about 5mm - then mount the holder onto Skadis pegboard and secure the T-nuts, then give it a good yank to verify it's not going anywhere and carefully mount your Palette 3 onto the mount.
Don't forget to set screen rotation to 180° in the menu (or just tilt your head - you do you, fam).