Weight buckle for knitting machine
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've been having a lot of fun with a 3D printed knitting machine and needed a way to hang weight from the work.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 152
- Makes
- 1
- Views
- 1,175
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
I've been having a lot of fun with a 3D printed sock knitting machine I made recently. So far I've just been using old socks full of BB's as weights inside the socks as I knit them. But I'm starting to experiment with a ribber and that means not having access to the inside to adjust weights - so I wanted a way to hang weights on the knitting from the outside.
I've seen a number of metal machines use a buckle like this so I decided to try printing one.
It requires a piece of 1/8" or 3mm metal rod about 60mm / 2.25" long to assemble. I considered making it with a print in place hinge - but since it needs to support a couple of lbs of weight I decided to use a metal pivot. Plus I had extra 3mm rod on hand from building my machine.
It seems to work quite well - though I think I'd make it about ½" wider and maybe a bit taller if I was to redesign it. For now it's usable and I'll see how I like using external weight before I decide if I need to redesign it.
Prints with no support in about an hour at .20 layers. Probably fine to print with thicker layers to do it faster…honestly I don't even think the teeth are really even necessary based on how it pinches the knit fabric and locks on when used.