1 / 2
Whisky barrel keychain container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hollow whisky barrel key fob
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 361
- Makes
- 4
- Views
- 1,226
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this after the measurements I found on internet of Jack Daniel’s whisky barrels. 1 Inch equals 1 mm.
I printed mine with a layer height of 0.15mm and used PLA.
You probably can get away with 0.20mm, with the threads in mind, but I wanted to play it safe.
Generally speaking you will get better threads with a lower layer height, e.g 0.15, assuming you have an otherwise calibrated printer.
Here is a article about manual color change if you have a single-extruder printer