1 / 4
RatRig Stronghold ONE and PRO inverted Y Dragchain mounts — image 1
1 / 4

RatRig Stronghold ONE and PRO inverted Y Dragchain mounts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dragchain mount to enable wiring to the front of your machine.

Rating
0 / 5
Likes
5
Downloads
40
Makes
0
Views
950
Reviews
0

Updated at source:

Model information

Category
Tools
License
Standard Digital File License

These mounts are 2cm extended so they clear the backplate when you reroute the dragchain to go to the front of the machine.

Will fit with original screws. 
You can remove 6-8 brackets of the drag chain .

Take care; the Ymotors and Y limit switch should NOT be routed through this; you can route them through the bottom opening of the extrusion.

Print them in PETG standing up, 3 or 4 walls, 25% adaptive infill.

 

Tags