1 / 4
RatRig Stronghold ONE and PRO inverted Y Dragchain mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dragchain mount to enable wiring to the front of your machine.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 950
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
These mounts are 2cm extended so they clear the backplate when you reroute the dragchain to go to the front of the machine.
Will fit with original screws.
You can remove 6-8 brackets of the drag chain .
Take care; the Ymotors and Y limit switch should NOT be routed through this; you can route them through the bottom opening of the extrusion.
Print them in PETG standing up, 3 or 4 walls, 25% adaptive infill.