IkeaLack stacker/riser
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€12.70 – €15.52 net (excluding VAT)
For file: IkeaLack_stack_riser_4cm_0.3mm_PETG_MK3S_10h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €14.11 excluding VAT (range midpoint).
- Weight reported by the author
- 261 g
- Print time reported by the author
- 10.9 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
IkeaLack stack/riser 4cm
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
You can screw the stackers to the legs of the upper table from below. Holes with a diameter of 4 mm are prepared.
The screw holes are countersunk by 32.5mm, so you can use shorter screws.
The diameter of the holes for the screw head/screwdriver is 8.2mm and the end of these holes is at an angle of 118 deg
The hole for the table leg is 5x5cm
Stackers increase the space between tables by 4 cm
Printing
Material: PETG
Layer: 0.3mm
Infill: 15-20%