Leveling and Test Print
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.33 – €0.40 net (excluding VAT)
For file: V.1_Ender_3_bed_leveling_procedure_[G-CODE.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.36 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a test print for bed leveling. You may have to run it multiple times for it to come out perfectly.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 72
- Makes
- 2
- Views
- 259
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
This is a test print for bed leveling. You may have to run it multiple times for it to come out perfectly.
Note: This is designed for an Ender 3, so if you have a different printer I'm not sure if it'll work.
For bed leveling:
- Grab a piece of normal copy paper.
- Start the print.
- Move the paper to the spot where the hot end is going
- Move the paper back and fourth
- Adjust the knobs so that you feel slight tension
- Press RESUME PRINT
- Repeat
For the Test Print:
- Start the print
- When the print finishes, look to see any flaws
- If flaws, re-level and try again