Hexagon Buttons of Different Sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a few Hex Buttons for my EDC cuff link / card set - so I thought I'd share a few size options of buttons only,…
- Rating
- 3 / 5
- Likes
- 31
- Downloads
- 89
- Makes
- 1
- Views
- 501
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a few Hex Buttons for my EDC cuff link / card set - so I thought I'd share a few size options of buttons only, if anyone's interested.
Here I have the following sizes:
The named dimension is on the side-to-side width, not the distance corner-to-corner
I've included the 3mf file for the 12.5mm, which seemed the common size on most of my shirts, and the gcode for the same print.
Print instructions
Slicer Settings
- Sliced using Prusa Slicer 2.3.0 Alpla-3
- Using the default 0.15mm QUALITY mode
- 15% infill
- 3mm Brim to improve adhesion
- And using "monotonic" infill for the top layer
Filament
- Printed as part of my Hex Cufflink Card, using Prusament PLA Galaxy Black, and alternating the colour for a white inlay.
Colour Inlay
Add a Filament Change using Prusa Slicer at 2.0mm (Layer 13) and 2.30mm (layer 15) for a nice coloured inlay / outer edge.
Or, simply swap colours at 2.3mm (Layer 15) for a simpler effect.
The 16mm buttons and upwards are slightly deeper, so please check the layers before printing
Enjoy :)