1 / 4
Composter Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
I had to make these clips, because two of the original ones got lost. In the images the original one is black and the new one is orange.
- It's probably better to use the “classic” perimeter generator (expert menu, “print settings:layers and perimeters:perimeter generator:Classic”, “Druckeinstellungen:Schichten und Umfänge:Umfangsgenerator:Klassisch”); “Arachne” won't fill the gap in the middle of the 4 layers in this model, where layers aren't connected
- I had to use supports
- used 3 vertical layers to enhance stability
- 40% infill
- printed using PETG, PLA will be too brittle
Version 2, 14.Mai 2023:
- made the lower opening smaller, because the original design kept getting off when the composter walls were not perfectly aligned.