Pokemon Popplio Led Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A decorative led light using the Pokemon Popplio shadow.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple plate with a box to build a led light representing the Pokemon Popplio (see my other builds with Pikachu and Eeve).
How to print
Really easy to print with 0.2mm. I recommend to add support for the box for the slot in which you will insert the pokemon plate, it will provide a better print. The rest of the print is straight forward.
How to build
To assemble the box, use M3 threaded inserts in the holes, and use use M3 bolt.
The pokemon plate holds in the slot without glue.
For the leds, use mini WS2812B RGB led PCB. Wire them in series and glue the leds at the back with hot glue.
The hole at the top of the box is designed to hold a rotary encoder. You can program this encoder as you. Personnally I use it as follows:
- Click to toggle the light
- Rotate to change the hue
For the controller, many solutions are possible : Arduino Pro Micro, ESP32, …
Personnally I have used an ESP32 programmed with ESPHOME. The ESP32 will perfectly manage up to 8 leds without powering issue. With ESPHOME it is easy to use the rotary encoder to interact with the led (or with all your home automation).
BOM
Leds: https://www.aliexpress.com/item/1005001971988539
M3 inserts: https://www.aliexpress.com/item/4000585933306.html
M3 bolts: https://www.aliexpress.com/item/32800975883.html
Rotary encoder: https://www.aliexpress.com/item/10000056483250.html