1 / 6
Raspberry Pi 3 Fan Case (40mm) — image 1
1 / 6

Raspberry Pi 3 Fan Case (40mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Case for Raspberry Pi 3, with 40mm fan and cutouts for GPIO pins and the two ribbon connectors.

Rating
4.875 / 5
Likes
73
Downloads
757
Makes
8
Views
2,527
Reviews
8

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

I did not find a case that really fit all of my needs and taste, so I decided to watch a Fusion360 Tutorial and make my own.

Through some trial and error I came up with this: a clean case for the RPI 3 that is tall enough for a heatsink and has the fan inside, not mounted on the outside.

The design is still work in progress, so please be kind and feel free to point out any dumb stuff  I did, or give me some ideas!

 

Update v1.1

  • Added top case version without cutouts
  • Made the USB and Ethernet port dividers wider
  • Added vent holes on the other side too
  • Made Micro-USB Port opening fit slightly better
  • Made SD Card opening have a slightly better shape

 

Print settings:

0.2 Layer height

3 Perimeters

Infill doesn't really matter at 2mm wall width

2-3 bottom and top layers

No supports anywhere

PLA or PETG

Tags